How To Manually Scan And Pair Your RTK Reference Station

Under some circumstances, users may need to reconnect or re-pair the mower with the RTK reference station.

For example, pairing is required when replacing an old or defective RTK reference station with a new one.
Also, if signal reception is poor, you may need to reconnect the RTK reference station via your Roborock app.

Below are the main steps to do so:

Settings--Manage RTK--Pair RTK Reference Station--Scan QR Code--Pairing--Pairing Successful

01. Manually Scan and Pair RTK.png02. Manually Scan and Pair RTK.png

03. Manually Scan and Pair RTK.png04. Manually Scan and Pair RTK.png

05. Manually Scan and Pair RTK.png06. Manually Scan and Pair RTK.png

How To Manually Scan And Pair Your RTK Reference Station

Related articles

What Should I Do If The Indicator Light In RTK Reference Station Is Not Green?

The RTK reference station signal is abnormal. Please troubleshoot using the steps below: Ensure the top of the RTK reference station has a clear view of the sky — no obstructions like roofs, branch...

How Do Roborock Mowers Work With The Assistance Of RTK And Satellites?

GNSS satellites provide initial positioning information to both the RTK reference station and the mower. The RTK reference station continuously receives GNSS satellite signals, calculates positioning...

How Does The Network of 4G And Wi-Fi Operate, Will It Switch Automatically?

This is no manual toggle for switching between 4G and Wi-Fi. Instead, here’s how it works now: When eSIM is turned ON, Wi-Fi is available, it will prefer Wi-Fi, and only switch to 4G when the ...
Loading...