Understanding Edge-Cutting Behavior And Modes

Roborock robotic lawn mowers offer different edge-cutting behaviors depending on the selected mowing mode and PreciEdge accessory configuration.

(1) Different Mowing Mode Behaviors

Mowing Mode

Edge-Cutting Performance

Full Mode (Global Mowing)

After completing the main central area, the mower will perform two laps of edge mowing around the edge. *

Area Mode (Selected Areas Mowing)

Follows the same logic as Full Mode. *

Edge Mode (Area Edge Mowing)

The mower only focuses on the edge and performs one lap only.

*Note: In the [Preferences] settings for both Full Mode and Area Mode, you will find the Edge-Cutting toggle:

-Switch ON: The mower will perform the two-lap edge mowing.

-Switch OFF: The mower will only mow the main area and won't mow the edge.

(2) The Two-Lap Logic (Full & Area Mode)

When edge-cutting toggle is on, the mower performs two laps and follows a specific sequence to ensure maximum coverage:

  1. Outer Lap (First): The mower moves directly along the boundary line.

  2. Inner Lap (Second): The mower moves slightly inward to mow a second parallel lap.

(3) When & how main blades and PreciEdge Accessory work?

The blade operation depends on your specific model and whether the PreciEdge kit is equipped.

Model Series

PreciEdge Accessory Status

Outer Lap (First)

Inner Lap (Second)

S Series

Built-in (Standard)

Main Blade + Side Blade

Main Blade Only

Q & Z Series

Optional (Purchased Separately)

Main Blade + Side Blade*

Main Blade Only

Q & Z Series

Not Installed

Main Blade Only

Main Blade Only

*Note: For Q & Z Series, the PreciEdge module will only operate if the accessory has been purchased and properly installed.

Understanding Edge-Cutting Behavior And Modes

Related articles

My Roborock Failed To Pass Through The Passage Between 2 Different Areas, What Do I Do?

Check if the app or your device’s display shows any error codes—these can help identify the root cause of the issue. Check the RTK indicator light on your mower. It should be solid green. If it’s not...

How Fast Is The RPM For Roborocks Motor And Can It Be Increased / Decreased?

RPM for main blade disk RPM for PreciEdge module Q105 2600 5000 Q110 2600 5000 S108 2600 5000 S115 2600 5000 Z115 2500 500...

What Is The Height Limitation Of Vertical Obstacle Avoidance Across The Roborock Range?

Vertical obstacles avoidance (PreciEdge module installed) Vertical obstacles avoidance (PreciEdge module not installed) Q105 4 cm 4 cm Q110 4 cm 4 cm S108 ...
Loading...