Check if the app displays any error codes. If it does, resolve those errors first, then try again and observe the result.
Check the light on your RTK reference station—it should be a solid green color. If it isn’t, refer to the reference station’s user guide for troubleshooting.
Make sure the binocular camera lens is clean and free of smudges, dirt, or condensation—blurry images can affect navigation.
Inspect the mower’s wheels to ensure they’re not blocked by grass clippings, twigs, stones, or other debris.
Look around the mowing area for obstacles (like toys, garden tools, or low-hanging branches) or uneven ground (such as potholes or bumps) that could prevent the mower from moving in a straight line.
Verify that the lawn slope is within the mower’s maximum incline limit—excessively steep terrain may cause drifting or unstable movement.
If the issue continues, end the current mowing task, close the app completely, restart the mower, and try again.
If the problem still persists, contact the Roborock Customer Service team or your authorized dealer for further assistance.
Vertical obstacles avoidance (PreciEdge module installed)
Vertical obstacles avoidance (PreciEdge module not installed)
Q105
4 cm
4 cm
Q110
4 cm
4 cm
S108
...
Check whether this large, uncut area is in a newly added zone—and whether a passage has been created between it and other already-mowed areas.
Verify the width of that passage. It must be at least 70...
Yes, it can but mapping requires some extra planning.
For a complete single‑map setup:
Mark clear danger zones along sharp drops, stair edges, or any verticality where the mower could fall off. This p...
