Why Does The Cutting Disc Stop Frequently During Remote Control Mowing?

Safety regulations require the disc to stop within 2 seconds of no operation. The software sends a stop command 8 ms after finger leaves the remote control box, causing repeated on/off if you frequently release the control.

Why Does The Cutting Disc Stop Frequently During Remote Control Mowing?

Related articles

What Is The Height Limitation Of Vertical Obstacle Avoidance Across The Roborock Range?

Vertical obstacles avoidance (PreciEdge module installed) Vertical obstacles avoidance (PreciEdge module not installed) Q105 4 cm 4 cm Q110 4 cm 4 cm S108 ...

Why Does My Roborock Mower Vibrate Violently Or Have A Higher Noise Than Usual?

Check whether the blades or blade disc are damaged, broken, or bent. If so, replace the blades and screws as needed. If the blade disc is broken or deformed, please contact your dealer or the Roborock...

Can I Remotely Monitor / Control My Roborock Through The Built-In 4G / eSIM, Without Wifi?

Yes. Once 4G/eSIM is activated, you can remotely control the mower through the Roborock App without local Wi-Fi, as long as the mower is powered on and connected to the mobile network. There are no lo...
Loading...