A Quick Guide On Understanding The Manual Height Adjustment Gears On The RockNeo Q1

The Q1 series has five manual height settings (gears). These five gears represent the cutting height and correspond to 20 mm, 30 mm, 40 mm, 50 mm, and 60 mm (40-80mm/1.57inch-3.15inch for Q110H) respectively. You can think of this height in two ways:

  • As the distance from the ground – that is, the clearance between the cutting blade and the soil surface.
  • As the grass retention height – the length of grass that remains on your lawn after mowing.

Choose the setting that best fits your lawn type, the season, and your personal preference. And because it’s manual, you have full control to change it whenever you like.

A Quick Guide On Understanding The Manual Height Adjustment Gears On The RockNeo Q1

Related articles

How Fast Is The RPM For Roborocks Motor And Can It Be Increased / Decreased?

RPM for main blade disk RPM for PreciEdge module Q105 2600 5000 Q110 2600 5000 S108 2600 5000 S115 2600 5000 Z115 2500 500...

What Is The Height Limitation Of Vertical Obstacle Avoidance Across The Roborock Range?

Vertical obstacles avoidance (PreciEdge module installed) Vertical obstacles avoidance (PreciEdge module not installed) Q105 4 cm 4 cm Q110 4 cm 4 cm S108 ...

What Can Cause Uneven Mowing Results?

Hardware factors Dull or damaged blades — Replace the blades if they’re worn, bent, or no longer sharp. Blade disc rotation — Ensure the blade disc spins freely. Clear away any grass clippings or ...
Loading...