A Quick Guide On Understanding The Manual Height Adjustment Gears On The RockNeo Q1

The Q1 series has five manual height settings (gears). These five gears represent the cutting height and correspond to 20 mm, 30 mm, 40 mm, 50 mm, and 60 mm (40-80mm/1.57inch-3.15inch for Q110H) respectively. You can think of this height in two ways:

  • As the distance from the ground – that is, the clearance between the cutting blade and the soil surface.
  • As the grass retention height – the length of grass that remains on your lawn after mowing.

Choose the setting that best fits your lawn type, the season, and your personal preference. And because it’s manual, you have full control to change it whenever you like.

A Quick Guide On Understanding The Manual Height Adjustment Gears On The RockNeo Q1

Related articles

How Good Is The Mowing Performance, Can It Handle Tall Grass Or Weeds?

The mower delivers excellent mowing performance and cuts grass cleanly—when the grass is within its recommended height range.

What Can Cause Uneven Mowing Results?

Hardware factors Dull or damaged blades — Replace the blades if they’re worn, bent, or no longer sharp. Blade disc rotation — Ensure the blade disc spins freely. Clear away any grass clippings or ...

Why Does The Cutting Disc Stop Frequently During Remote Control Mowing?

Safety regulations require the disc to stop within 2 seconds of no operation. The software sends a stop command 8 ms after finger leaves the remote control box, causing repeated on/off if you frequent...
Loading...